Official Luthiers Forum!
http://www-.luthiersforum.com/forum/

Woolson Neck Jig plans. Ive had another run of interests, ?
http://www-.luthiersforum.com/forum/viewtopic.php?f=10101&t=31445		 Page 1 of 1
Author:  LanceK [ Thu Mar 10, 2011 11:26 am ]
Post subject:  Woolson Neck Jig plans. Ive had another run of interests, ?
If there is enough interests ill print up another batch.

Email me at lance@kragenbrinkguitars.com and ill start a list in a
folder in my inbox. If we hit a certain number its worth doing.

Price is 33.00 shipped to your door with in a week of me receiving them from the printer.

So, what ill do is take orders via email, once we hit the magic number ill send out a email notice to pay up. Ill order the prints. When we get them we will fold, pack and ship with in a day or two. Theresa is great at that ;)
Author:  klooker [ Thu Mar 10, 2011 11:37 am ]
Post subject:  Re: Woolson Neck Jig plans. Ive had another run of interests, ?
I'm relatively new here & I don't know what exactly the Woolson jig does.

Can someone point me to a post or something that shows the jig & how it works?

Thanks,
Kevin Looker
Author:  ernie [ Thu Mar 10, 2011 11:53 am ]
Post subject:  Re: Woolson Neck Jig plans. Ive had another run of interests, ?
Hi lance I left a message on your phone. Sign me up, I am interested ,paypal? check ?? or ?? Kevin I/m new here too I believe that this is the jig robbie o/brien uses in his bolt on neck motise and tenon joint . Just google his videos he has 66 and it will be there. Lance is that jig both for the mortise , and seperate one for the male tenon or both ??. I drew up a rough sketch this morning of the mortising jig, after watching the video, and asked myself. Very simple , very slick! but the male tenon part with the built in angle finder is much more complicated regards ernie
Author:  Mike OMelia [ Thu Mar 10, 2011 7:48 pm ]
Post subject:  Re: Woolson Neck Jig plans. Ive had another run of interests, ?
klooker wrote:
I'm relatively new here & I don't know what exactly the Woolson jig does.

Can someone point me to a post or something that shows the jig & how it works?

Thanks,
Kevin Looker


That makes two of us. But I did order one. Got them right here in front of me. Trust me, go for it. Plus, it supports the site.

Mike (ok, I know its weird, but thats just the way I am)
Author:  ernie [ Sat Mar 12, 2011 8:03 am ]
Post subject:  Re: Woolson Neck Jig plans. Ive had another run of interests, ?
Hi yesterday aft I contacted robbie o/brien . He did the mortise/tenon bolt on neck video. If you contact him, He is selling the e- mail plans for $20, plus access to 4 well done videos that explain how to assemble the M/t /dovetail jigs,. Be forewarned the jig is not easy to make . Prior jig experience is essential !. As there is a lot of finicky details. The videos go into great detail, on how to use the jigs , which I found very useful.
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/